What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 01:53

There are three different concepts here that are getting confused.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–14 [Omar Gharbi Omar Gharbi ]
South Florida-based Silver Airways shuts down, stranding travelers - Sun Sentinel
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
In schematic diagrams this is the symbol for a fuse:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A circuit breaker is similar, but is resettable.
This device then solves the entire problem.
My ex got into a relationship within 2 weeks after a breakup. What should I do?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What legal actions can be taken if a neighbor's unleashed dog causes harm or injury?
2024–10–16 [ OO OLAOYE OYEBODE ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
First Sentence:
Why do men think I’m easy just by looking at me?
This is where the MOV conducts again, and dissipated the energy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The other is “what does a “fuse” do?”
How do I explain to my husband that my 19-year-old son has accidentally gotten me pregnant?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
but I think this circuit , shows a few more pieces.
Why do good-looking men date homely women?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
What life lesson did you learn the hard way?
(Dc diagram shown, AC is similar).
This one hit behind the barn.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What is the XXX XXX Keerna Kappor video?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Because the load is inductive, the current lags the voltage.(by a bit).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What is your favourite true story to tell at a party?
The bolt then partially travels down the line to your home.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It also is a device that limits the change in current flow.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
It seems Mohan does not understand the difference between a comment and an Answer.
An AC voltage/ current source, and an ac inductive load.
a photo is worth a thousand words.
But it can get overloaded, and no longer works.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Are you worried that the 2024 US presidential election will result in a close race?
But… the neutral is now “floating” because of the 1 ohm resistance.
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
Scottie Scheffler Calls US Open at Oakmont 'The Hardest Golf Course...Maybe Ever' - Bleacher Report
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
the problem then depends on "how fast does the fuse operate?".
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
[old diagram got deleted by accident]
nine
The third is lightning and “how it gets conducted into a home.”
I post the exact comment here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
what exactly is a ‘surge’ protector?
[image of Common-mode choke]
eight
At least they know the answer if they wanted it.
Barnstars:
What is lightning?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
One
Can the fuse protect the electronic devices from lightning instead of a surge protector.
A fuse is a non-resetable over current circuit protector.
At one ohm, the resistor has a maximum of 1 watt power.
This is 'the assistant's answer'
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then asserts :
Upvotes:
One is “what exactly is in a ‘surge protector’ ? ”
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–10[John johnson John Johnson ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
For this case there are devices called Metal oxide varistors (MOV).
Here is a simplified AC power diagram.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes Rainy Season and Lightning.